您好, 歡迎來到化工儀器網
SANTEST_GYGSC位移傳感器控制器SANTEST_GYGSC-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYGSC是日本SANTEST公司生產的線性位移傳感器控制器，高精度，高品質，：
產品簡介
詳細介紹
SANTEST_GYGSC位移傳感器控制器SANTEST_GYGSC-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYGSC是日本SANTEST公司生產的線性位移傳感器控制器，高精度，高品質，：
|
Specifications
Non-linearity | < ±0.025%FS TYP |
Resolution | < 0.01%FS |
Repeatability | < ±0.01%FS |
Temp drift | ±40ppmFS/°C (probe) / ±50ppmFS/°C (controller) |
Voltage output | 0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ) |
Current output | 4-20mA or 20-4mA / (load:Min.500Ω) |
Power supply | +24 (±2) VDC (100mA) |
Frequency response | Std 1kHz(depending on stroke) sampling |
Admissible press. | 35MPa(probe rod) |
Operating Temp | -20°C-+80°C (probe) / 0°C-+60°C (controller) |
Storage Temp | -40°C-+80°C |
Vibration | 6G (or 40Hz 2mmPP) |
Shock | 50G (2msec) |
Protection | IP67 (probe) |
Cable length | 1.5m (Standard) (Option Max.50m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.
Model No.
(1):Effective stroke
15mm-3000mm
(2):Thread
N8:M18xP1.5, rod Φ8
(Standard)
N:M18xP1.5, rod Φ10
(thread length = 22mm)
(3):Cable length (m)
Standard:1.5m
(4):Cable out direction
L:radial out (Standard)
S:axial out (Option)
(1):Output
A:0-10V
B:4-20mA
C:others (bipolar)
(2):Effective stroke
15mm-3000mm
(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease
Dimensions
|
|
|
Material probe head:SS304.Bs, probe rod:SS304, cable gland:Bs
Standard magnet:No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Cable direction of radial output type is adjustable.
SANTEST_GYGSC位移傳感器控制器SANTEST_GYGSC-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYGSC是日本SANTEST公司生產的線性位移傳感器控制器，高精度，高品質，：
|
Specifications
Non-linearity | < ±0.025%FS TYP |
Resolution | < 0.01%FS |
Repeatability | < ±0.01%FS |
Temp drift | ±40ppmFS/°C (probe) / ±50ppmFS/°C (controller) |
Voltage output | 0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ) |
Current output | 4-20mA or 20-4mA / (load:Min.500Ω) |
Power supply | +24 (±2) VDC (100mA) |
Frequency response | Std 1kHz(depending on stroke) sampling |
Admissible press. | 35MPa(probe rod) |
Operating Temp | -20°C-+80°C (probe) / 0°C-+60°C (controller) |
Storage Temp | -40°C-+80°C |
Vibration | 6G (or 40Hz 2mmPP) |
Shock | 50G (2msec) |
Protection | IP67 (probe) |
Cable length | 1.5m (Standard) (Option Max.50m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.
Model No.
(1):Effective stroke
15mm-3000mm
(2):Thread
N8:M18xP1.5, rod Φ8
(Standard)
N:M18xP1.5, rod Φ10
(thread length = 22mm)
(3):Cable length (m)
Standard:1.5m
(4):Cable out direction
L:radial out (Standard)
S:axial out (Option)
(1):Output
A:0-10V
B:4-20mA
C:others (bipolar)
(2):Effective stroke
15mm-3000mm
(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease
Dimensions
|
|
|
Material probe head:SS304.Bs, probe rod:SS304, cable gland:Bs
Standard magnet:No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Cable direction of radial output type is adjustable.