您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 價格區間 | 面議 |
|---|---|---|---|
| 儀器種類 | 管式爐 | 應用領域 | 醫療衛生,環保,食品/農產品,化工 |
產品簡介
詳細介紹
開啟式四溫區管式爐, BTF-1200C-IV
Main features:
1200度4溫區加熱燒結爐主要特點：
1) Can control the four heating zones with four control point
四點控溫，四段加熱區可獨立控制
2) Chamber veined with 12 sets of resistance wire, achieve uniform tem. field and longer constant zone.
爐膛上下各6組電阻絲，溫場均勻，恒溫區更長。
3）Equipped with support frame for flange, reduce the load of tube body
法蘭兩端配備支撐架，減輕管體的負荷。
4）Pneumatic spring for opening, which is safer for operator.
氣動彈簧支撐結構讓操作者可安全開啟。
5）Open type make convenient for operation
開啟式讓操作更方便
Technical Parameters
1200度4溫區加熱燒結爐技術參數
Power 輸入電源 | · Power rated: 7KW (208-240V) · 額定功率：7KW (208-240V) |
Voltage 電壓 | · Voltage rated: AC208-240V 50/60HZ · 額定電壓： AC208-240V 50/60HZ |
Working Temperature 工作溫度 | · Max. Temperature: 1200 °C ( 1 hr) 最高溫度：1200℃ (1小時) · Continuous working temperature: ≤1100℃ 持續工作溫度：≤1100℃ · Max. heating Rate: ≤30°C /min 最大升溫速率：≤30℃/分 |
控溫方式 | · PID automatic control and auto-tune function. 模糊PID控制和自整定調節 · 30 programmable segments for precise thermal processing. 智能化30段可編程控制 · Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
Length of heating zone 加熱區長度 | · 200+200+200+200mm |
Length of constant zone 恒溫區長度 | · 100+200+200+100mm |
Heating Elements 加熱元件 | · Resistance wire, Fe-Cr-Al Alloy doped by Mo · 電阻絲（摻鉬鐵鉻鋁合金） |
Temperature Accuracy 控溫精度 | +/- 1 °C |
Dimensions 尺寸 | · Tube size: Φ50/60/80/100/130*1400mm (optional) · 爐管尺寸：Φ50/60/80/100/130*1400mm (可選) · Overall size: 1080*440*590mm(L*W*H without tube & flange) · 外形尺寸：1080*440*590mm(L*W*H 不含爐管和法蘭) · Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). · 兩個氧化鋁管堵阻擋管中心產生的熱輻射（氧化鋁管堵必須在加熱前塞進爐膛） |
Net Weight 凈重 | 90kg |
Vacuum Flange 真空法蘭 | · KF25 quick clamp flange KF25快速卡箍法蘭 |
Vacuum Pressure 真空壓力 | · 10^-1pa can be achieved by mechanical pump 機械泵可達10^-1pa · 10^-3pa can be reached by molecular pump 分子泵可達10^-3pa
|
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） |
Warning 注意事項 | · Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety · 沒有安全控制和監督的情況下，不建議使用有毒或爆炸性氣體。為了安全，請把爐子放在通風處。 · Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. · 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
Compliance 認證 | · CE Certified CE認證 |
其他推薦產品
更多產品-
面議
-
面議
-
面議